Laney LX Series 120W 2x12 Combo Reve
FX loops are important as they allow you to add effects to the signal path in a specific place between the pre-amp and the output section on an amplifier. This is where FX loops are important as it allows you to put time-based FX after the distorted pre-amp section. For example, delayed distortion sounds different to distorted delay – try it.
Features
- MP3/Aux in
- On-board reverb
- 1 x Extension speaker connection (4 Ohm min)
- FS2-MINI available as an accessory
- Independent 3 band EQ
- Radical XTS tone shaping
- 120 Watts
- Clean & Drive
- Loaded with 2 x 12" HH Drivers
Specifications
- Supply Voltage ~100V, ~120V, ~220V, ~230V, ~240V 50/60Hz Factory Option
- Mains Fuse ~220V > ~240V = TIA L. ~100V > ~120V = T2A L
- Power Consumption 220W
- Output Power Rating 120W
- Loudspeaker 2 Custom Designed 12'' Drivers
- Features TEC Tube Emulating Technology XTS eXtreme Tone Shaping (Drive Channel Only) Speaker Socket (Min 8 Ohm Impedance) AUX IN (10K Input Impedance) (Nominal 750mV Input Level) FX Loop (Nominal 750mV Level) Footswitchable - Channel and FX (Footswitch not included)
- Reverb Yes
- EQ Both Channels contain separate Passive bass, middle, and treble
- Input Impedance IMOhm/47pF
$700.44
Laney LX Series 120W 2x12 Combo Reve—
$700.44
More Images
Laney LX Series 120W 2x12 Combo Reve
FX loops are important as they allow you to add effects to the signal path in a specific place between the pre-amp and the output section on an amplifier. This is where FX loops are important as it allows you to put time-based FX after the distorted pre-amp section. For example, delayed distortion sounds different to distorted delay – try it.
Features
- MP3/Aux in
- On-board reverb
- 1 x Extension speaker connection (4 Ohm min)
- FS2-MINI available as an accessory
- Independent 3 band EQ
- Radical XTS tone shaping
- 120 Watts
- Clean & Drive
- Loaded with 2 x 12" HH Drivers
Specifications
- Supply Voltage ~100V, ~120V, ~220V, ~230V, ~240V 50/60Hz Factory Option
- Mains Fuse ~220V > ~240V = TIA L. ~100V > ~120V = T2A L
- Power Consumption 220W
- Output Power Rating 120W
- Loudspeaker 2 Custom Designed 12'' Drivers
- Features TEC Tube Emulating Technology XTS eXtreme Tone Shaping (Drive Channel Only) Speaker Socket (Min 8 Ohm Impedance) AUX IN (10K Input Impedance) (Nominal 750mV Input Level) FX Loop (Nominal 750mV Level) Footswitchable - Channel and FX (Footswitch not included)
- Reverb Yes
- EQ Both Channels contain separate Passive bass, middle, and treble
- Input Impedance IMOhm/47pF
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
FX loops are important as they allow you to add effects to the signal path in a specific place between the pre-amp and the output section on an amplifier. This is where FX loops are important as it allows you to put time-based FX after the distorted pre-amp section. For example, delayed distortion sounds different to distorted delay – try it.
Features
- MP3/Aux in
- On-board reverb
- 1 x Extension speaker connection (4 Ohm min)
- FS2-MINI available as an accessory
- Independent 3 band EQ
- Radical XTS tone shaping
- 120 Watts
- Clean & Drive
- Loaded with 2 x 12" HH Drivers
Specifications
- Supply Voltage ~100V, ~120V, ~220V, ~230V, ~240V 50/60Hz Factory Option
- Mains Fuse ~220V > ~240V = TIA L. ~100V > ~120V = T2A L
- Power Consumption 220W
- Output Power Rating 120W
- Loudspeaker 2 Custom Designed 12'' Drivers
- Features TEC Tube Emulating Technology XTS eXtreme Tone Shaping (Drive Channel Only) Speaker Socket (Min 8 Ohm Impedance) AUX IN (10K Input Impedance) (Nominal 750mV Input Level) FX Loop (Nominal 750mV Level) Footswitchable - Channel and FX (Footswitch not included)
- Reverb Yes
- EQ Both Channels contain separate Passive bass, middle, and treble
- Input Impedance IMOhm/47pF
