BOSS ME-90B Bass Multi-Effects Pedal
Features
- All-in-one bass processor with premium BOSS amps and effects
- Easy stompbox-style sound creation with an intuitive knob-based interface
- Superior sound quality with 24-bit AD and 32-bit DA conversion, 32-bit floating-point processing, and 48 kHz sampling rate
- 61 effects from the BOSS bass effects library
- Ten onboard AIRD preamp models including newly developed types
- Dedicated preamp section plus six simultaneous effect categories with multiple types to choose from
- Edit parameters, swap out preamp and effect types, and more with BOSS Tone Studio
- Eight multi-function footswitches and an expression pedal with toe switch
- 36 ready-to-play preset memories and 36 user memories for storing custom setups
- Manual mode for pedalboard-style operation and Memory mode for switching complete setups
- Blend knob for mixing in the direct bass sound
- Stereo 1/4-inch outputs and mono XLR balanced output with ground lift switch
- Rear-panels witch to optimize the 1/4-inch audio outputs for a bass amp or full-range sound system
- Send/return loop for external pedals
- Light, durable design and colorful status LEDs
- Load up to three user speaker IR
- Powered via four AA batteries or optional AC adaptor
- USB-C® connector for communicating with BOSS Tone Studio and audio recording/playback with music production software
- Download and share ME-90B Livesets on BOSS Tone Exchange
- Optional Bluetooth® Audio MIDI Dual Adaptor allows you to edit sounds and stream audio from an iOS or Android mobile device
Specifications
Sampling Frequency 48 kHz AD Conversion 24 bits + AF method AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converters. DA Conversion 32 bits Processing 32-bit floating point Effects 93 Types Memories 36 (User) + 36 (Preset) Phrase Loop 38 sec. (MONO) Internal Tuning Detection Accuracy ±0.1 cent Nominal Input Level INPUT: -10 dBu RETURN: -10 dBu Maximum Input Level INPUT: +7 dBu RETURN: + 7dBu Input Impedance INPUT: 1 M ohm RETURN: 1 M ohm Nominal Output Level OUTPUT L/MONO、R: -10 dBu PHONES: -10 dBu SEND: -10 dBu BALANCED OUTPUT: -10 dBu Output Impedance OUTPUT L/MONO, R: 1 k ohm PHONES: 44 ohms SEND: 1 k ohm BALANCED OUTPUT: 600 ohms Recommended Load Impedance OUTPUT L/MONO, R: 10 k ohms or greater PHONES: 44 ohms or greater SEND: 10 k ohms or greater BALANCED OUTPUT: 600 ohms or greater Controls BANK▼/AMP/EQ switch, BANK▲/MOD switch, CTL/BLEND switch, MEMORY/MANUAL switch, 1/COMP switch, 2/FILTER switch, 3/DRV/SYN switch, 4/DLY/REV switch, PEDAL FX switch, GND LIFT switch, AMP/LINE switch, POWER switch, Controls EXIT button, WRITE button, CTL button, EDIT button- PREAMP TYPE knob
- BASS knob
- MIDDLE knob
- TREBLE knob
- GAIN knob
- LEVEL knob
- MOD TYPE knob
- TYPE knob
- RATE/TIME knob
- DEPTH/DUTY/FB knob
- E.LEV/RESO knob
- BLEMD knob
- COMP/FX1 TYPE knob
- SUSTAIN/LOW/-1OCT knob
- ATTACK/HIGH/-2OCT knob
- LEVEL/DIRECT knob
- FILTER/FX2 TYPE knob
- SENS/RATE/KEY knob
- TONE/DEPTH/HRM knob
- PEAK/LEVEL/RESO knob
- DRIVE/SYNTH TYPE knob
- DRIVE knob
- TONE knob
- LEVEL knob
- DLY/REV TYPE knob
- TIME knob
- FEEDBACK/TONE knob
- E.LEVEL knob
- OUTPUT LEVEL knob
- PEDAL FX TYPE knob
Original: $518.00
-65%$518.00
$181.30More Images
BOSS ME-90B Bass Multi-Effects Pedal
Features
- All-in-one bass processor with premium BOSS amps and effects
- Easy stompbox-style sound creation with an intuitive knob-based interface
- Superior sound quality with 24-bit AD and 32-bit DA conversion, 32-bit floating-point processing, and 48 kHz sampling rate
- 61 effects from the BOSS bass effects library
- Ten onboard AIRD preamp models including newly developed types
- Dedicated preamp section plus six simultaneous effect categories with multiple types to choose from
- Edit parameters, swap out preamp and effect types, and more with BOSS Tone Studio
- Eight multi-function footswitches and an expression pedal with toe switch
- 36 ready-to-play preset memories and 36 user memories for storing custom setups
- Manual mode for pedalboard-style operation and Memory mode for switching complete setups
- Blend knob for mixing in the direct bass sound
- Stereo 1/4-inch outputs and mono XLR balanced output with ground lift switch
- Rear-panels witch to optimize the 1/4-inch audio outputs for a bass amp or full-range sound system
- Send/return loop for external pedals
- Light, durable design and colorful status LEDs
- Load up to three user speaker IR
- Powered via four AA batteries or optional AC adaptor
- USB-C® connector for communicating with BOSS Tone Studio and audio recording/playback with music production software
- Download and share ME-90B Livesets on BOSS Tone Exchange
- Optional Bluetooth® Audio MIDI Dual Adaptor allows you to edit sounds and stream audio from an iOS or Android mobile device
Specifications
Sampling Frequency 48 kHz AD Conversion 24 bits + AF method AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converters. DA Conversion 32 bits Processing 32-bit floating point Effects 93 Types Memories 36 (User) + 36 (Preset) Phrase Loop 38 sec. (MONO) Internal Tuning Detection Accuracy ±0.1 cent Nominal Input Level INPUT: -10 dBu RETURN: -10 dBu Maximum Input Level INPUT: +7 dBu RETURN: + 7dBu Input Impedance INPUT: 1 M ohm RETURN: 1 M ohm Nominal Output Level OUTPUT L/MONO、R: -10 dBu PHONES: -10 dBu SEND: -10 dBu BALANCED OUTPUT: -10 dBu Output Impedance OUTPUT L/MONO, R: 1 k ohm PHONES: 44 ohms SEND: 1 k ohm BALANCED OUTPUT: 600 ohms Recommended Load Impedance OUTPUT L/MONO, R: 10 k ohms or greater PHONES: 44 ohms or greater SEND: 10 k ohms or greater BALANCED OUTPUT: 600 ohms or greater Controls BANK▼/AMP/EQ switch, BANK▲/MOD switch, CTL/BLEND switch, MEMORY/MANUAL switch, 1/COMP switch, 2/FILTER switch, 3/DRV/SYN switch, 4/DLY/REV switch, PEDAL FX switch, GND LIFT switch, AMP/LINE switch, POWER switch, Controls EXIT button, WRITE button, CTL button, EDIT button- PREAMP TYPE knob
- BASS knob
- MIDDLE knob
- TREBLE knob
- GAIN knob
- LEVEL knob
- MOD TYPE knob
- TYPE knob
- RATE/TIME knob
- DEPTH/DUTY/FB knob
- E.LEV/RESO knob
- BLEMD knob
- COMP/FX1 TYPE knob
- SUSTAIN/LOW/-1OCT knob
- ATTACK/HIGH/-2OCT knob
- LEVEL/DIRECT knob
- FILTER/FX2 TYPE knob
- SENS/RATE/KEY knob
- TONE/DEPTH/HRM knob
- PEAK/LEVEL/RESO knob
- DRIVE/SYNTH TYPE knob
- DRIVE knob
- TONE knob
- LEVEL knob
- DLY/REV TYPE knob
- TIME knob
- FEEDBACK/TONE knob
- E.LEVEL knob
- OUTPUT LEVEL knob
- PEDAL FX TYPE knob
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Features
- All-in-one bass processor with premium BOSS amps and effects
- Easy stompbox-style sound creation with an intuitive knob-based interface
- Superior sound quality with 24-bit AD and 32-bit DA conversion, 32-bit floating-point processing, and 48 kHz sampling rate
- 61 effects from the BOSS bass effects library
- Ten onboard AIRD preamp models including newly developed types
- Dedicated preamp section plus six simultaneous effect categories with multiple types to choose from
- Edit parameters, swap out preamp and effect types, and more with BOSS Tone Studio
- Eight multi-function footswitches and an expression pedal with toe switch
- 36 ready-to-play preset memories and 36 user memories for storing custom setups
- Manual mode for pedalboard-style operation and Memory mode for switching complete setups
- Blend knob for mixing in the direct bass sound
- Stereo 1/4-inch outputs and mono XLR balanced output with ground lift switch
- Rear-panels witch to optimize the 1/4-inch audio outputs for a bass amp or full-range sound system
- Send/return loop for external pedals
- Light, durable design and colorful status LEDs
- Load up to three user speaker IR
- Powered via four AA batteries or optional AC adaptor
- USB-C® connector for communicating with BOSS Tone Studio and audio recording/playback with music production software
- Download and share ME-90B Livesets on BOSS Tone Exchange
- Optional Bluetooth® Audio MIDI Dual Adaptor allows you to edit sounds and stream audio from an iOS or Android mobile device
Specifications
Sampling Frequency 48 kHz AD Conversion 24 bits + AF method AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converters. DA Conversion 32 bits Processing 32-bit floating point Effects 93 Types Memories 36 (User) + 36 (Preset) Phrase Loop 38 sec. (MONO) Internal Tuning Detection Accuracy ±0.1 cent Nominal Input Level INPUT: -10 dBu RETURN: -10 dBu Maximum Input Level INPUT: +7 dBu RETURN: + 7dBu Input Impedance INPUT: 1 M ohm RETURN: 1 M ohm Nominal Output Level OUTPUT L/MONO、R: -10 dBu PHONES: -10 dBu SEND: -10 dBu BALANCED OUTPUT: -10 dBu Output Impedance OUTPUT L/MONO, R: 1 k ohm PHONES: 44 ohms SEND: 1 k ohm BALANCED OUTPUT: 600 ohms Recommended Load Impedance OUTPUT L/MONO, R: 10 k ohms or greater PHONES: 44 ohms or greater SEND: 10 k ohms or greater BALANCED OUTPUT: 600 ohms or greater Controls BANK▼/AMP/EQ switch, BANK▲/MOD switch, CTL/BLEND switch, MEMORY/MANUAL switch, 1/COMP switch, 2/FILTER switch, 3/DRV/SYN switch, 4/DLY/REV switch, PEDAL FX switch, GND LIFT switch, AMP/LINE switch, POWER switch, Controls EXIT button, WRITE button, CTL button, EDIT button- PREAMP TYPE knob
- BASS knob
- MIDDLE knob
- TREBLE knob
- GAIN knob
- LEVEL knob
- MOD TYPE knob
- TYPE knob
- RATE/TIME knob
- DEPTH/DUTY/FB knob
- E.LEV/RESO knob
- BLEMD knob
- COMP/FX1 TYPE knob
- SUSTAIN/LOW/-1OCT knob
- ATTACK/HIGH/-2OCT knob
- LEVEL/DIRECT knob
- FILTER/FX2 TYPE knob
- SENS/RATE/KEY knob
- TONE/DEPTH/HRM knob
- PEAK/LEVEL/RESO knob
- DRIVE/SYNTH TYPE knob
- DRIVE knob
- TONE knob
- LEVEL knob
- DLY/REV TYPE knob
- TIME knob
- FEEDBACK/TONE knob
- E.LEVEL knob
- OUTPUT LEVEL knob
- PEDAL FX TYPE knob